|
buttons1) Press the buttons on the remote control.Notef To use these buttons, connect with Wired LAN or Wireless LAN, connect port of the projector and yourcomputer with a USB cable.Using the DIGITAL ZOOM function(Only for still image-based computer (RGB) and still image-based HDMI signals input)You can enlarge the center area. You can also change the location of the area to be enlarged.buttons1) Press the button or < D.ZOOM -> button on the remote control.f The moving screen is displayed.f The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For details, referto [DISPLAY OPTION] → [OTHER FUNCTIONS] (x page 75).f You can press the button to cancel the function.r Button functions during [DIGITAL ZOOM]Operation menu Operation Adjustment Adjustment rangePress the button or w button. Increases magnification.1.0 ~ 3.0Press the button or q button. Decreases magnification.r Button functions of moving screenOperation menu Operation AdjustmentPress the a button. The display position moves down.Press the s button. The display position moves up.Press the q button. The display position moves right.Press the w button. The display position moves left.f When you have executed the operation of remote control directly, the individual adjustment screen is not displayedand the operation menu of the moving screen is displayed. At this time, you can adjust the magnification by using the button or button on the remote control.Notef Magnification can be set from 1.0x to 3.0x in 0.1 increments.f When press the f When the input signals change during [DIGITAL ZOOM], the adjustment value of DIGITAL ZOOM will be cancelled.f When [DIGITAL ZOOM] is active, the FREEZE function is not available.f The digital zoom function may not work properly for some still image-based signals.ABCABCABC ABCABC E.g. When you press the wbutton, the display positionmoves to the left.52 - ENGLISHChapter 3 Basic Operations - Basic operations by using the remote control PreviousNext |