f If you change the settings in the [INTERVAL] or [EFFECT] during playback of a MEMORY VIEWER, it does not affect theprojected image during playback. Please re-play it back to the MEMORY VIEW screen in the [THUMBNAIL] display methodor [LIST] display method. For information on how to use MEMORY VIEW function, refer to “Memory Viewer Function”.(x page 116)f When the [GUIDE] is set to [ON], the operation guide and timer bar will automatically disappear after about 3 seconds.f Press asqw or the button in a still image during playback, the operation guide will appear; press aqw or the button in a video during playback, the operation guide and timer bar will appear.[MIRRORING]You can make detailed settings of the MIRRORING function.1) Press as to select [MIRRORING].2) Press the button.f The [MIRRORING] screen is displayed.[AUTONOMOUS GROUPOWNER]Sets the projector to be or not to be the autonomous group owner via Intel ® WiDi / Intel®Pro WiDi / Miracast connection. Once the projector is set to be the autonomous groupowner, [MANAGED MEETING] or [CHANNEL] can be selected.[ON] Sets the projector to be the autonomous group owner.[OFF] Sets the projector not to be the autonomous group owner.[MANAGED MEETINGS] Enables / disables the managed meeting of Intel® WiDi or Intel® Pro WiDi.[ON] Enables the managed meeting.[OFF] Disables the managed meeting.[CHANNEL] Selects the communication channels used by Intel ® WiDi / Intel® Pro WiDi / Miracast.[CONNECTION TYPE] Selects the connection type for the MIRRORING function.[PIN] A PIN (8-digit number) will be displayed in the idle screen of the MIRRORING function,and then makes connection by entering the PIN on the device.[AUTO] If the PIN connection is supported on the device, do the PIN connection. If it is notsupported, do the connection without a PIN.[LOWER BANDWIDTHMODE] Enables / disables the lower bandwidth mode of Intel® WiDi or Intel® Pro WiDi.[OFF] Disables the lower bandwidth mode.[ON] Enables the lower bandwidth mode. The bit rate will decrease, and the image quality willreduce.Notef Even if the [AUTONOMOUS GROUP OWNER] is set to [OFF], it may set to the autonomous group owner depending on theconnected device.f If you cannot connect to the projector, or the projector is not existed in the available connection device list, you can try toswitch the [AUTONOMOUS GROUP OWNER] to [OFF] or [ON].f For more information about Intel® WiDi or Intel® Pro WiDi conference mode, please refer to the HELP of Intel® WiDi or Intel®Pro WiDi application, or visit the Intel Corporation website.[STATUS]Displays the current network status.1) Press as to select [STATUS].2) Press the button.f The [STATUS] screen (WIRED LAN 1/3) is displayed.3) Press as to switch between the screen (WIRED LAN 1/3 → WIRELESS LAN 2/3 →WIRELESS LAN 3/3).f The page will switch each time you press the button.[WIRED LAN] Displays the network information of the wired LAN that set on the projector.[DHCP] Displays the usage state of the DHCP server.[IP ADDRESS] Displays the IP address.[SUBNET MASK] Displays the subnet mask.[DEFAULT GATEWAY] Displays the default gateway.[DNS1] Displays the address of the primary DNS server.[DNS2] Displays the address of the secondary DNS server.ENGLISH - 95Chapter 4 Settings - [NETWORK/USB] menu
