STARTING AND OPERATING 249To Vary The Speed SettingTo Increase SpeedWhen the Speed Control is set, you can increasespeed by pushing the SET (+) button.The driver’s preferred units can be selectedthrough the instrument panel settings. Refer to”Instrument Cluster Display” in “Getting ToKnow Your Instrument Panel” for moreinformation. The speed increment shown isdependent on the chosen speed unit of U.S.(mph) or Metric (km/h):U.S. Speed (mph) Pushing the SET (+) button once will result ina 1 mph increase in set speed. Each subse-quent tap of the button results in an increaseof 1 mph. If the button is continually pushed, the setspeed will continue to increase until thebutton is released, then the new set speedwill be established.Metric Speed (km/h) Pushing the SET (+) button once will result ina 1 km/h increase in set speed. Each subse-quent tap of the button results in an increaseof 1 km/h. If the button is continually pushed, the setspeed will continue to increase until thebutton is released, then the new set speedwill be established.To Decrease SpeedWhen the Speed Control is set, you candecrease speed by pushing the SET (-) button.The driver’s preferred units can be selectedthrough the instrument panel settings. Refer to”Instrument Cluster Display” in “Getting ToKnow Your Instrument Panel” for moreinformation. The speed decrement shown isdependent on the chosen speed unit of U.S.(mph) or Metric (km/h):U.S. Speed (mph) Pushing the SET (-) button once will result ina 1 mph decrease in set speed. Each subse-quent tap of the button results in a decreaseof 1 mph. If the button is continually pushed, the setspeed will continue to decrease until thebutton is released, then the new set speedwill be established.Metric Speed (km/h) Pushing the SET (-) button once will result ina 1 km/h decrease in set speed. Each subse-quent tap of the button results in a decreaseof 1 km/h. If the button is continually pushed, the setspeed will continue to decrease until thebutton is released, then the new set speedwill be established.To Accelerate For PassingPress the accelerator as you would normally.When the pedal is released, the vehicle willreturn to the set speed.To Resume SpeedTo resume a previously set speed, push the RESbutton and release. Resume can be used at anyspeed above 20 mph (32 km/h).5
