94 GETTING TO KNOW YOUR VEHICLEThere are stampings in the sheet metal on theinner side bulkheads of the box in front of andbehind both wheel housings. Place woodenboards across the box from side to side tocreate separate load compartments in thepickup box.There are four tie-down cleats bolted to thelower sides of the pickup box that can sustainloads up to 1,000 lbs (450 kg) total.RAMBOX — IF EQUIPPEDThe RamBox system is an integrated pickup boxstorage and cargo management systemconsisting of three features: Integrated box side storage bins Cargo divider Bed rail tie-down systemNOTE:Bed rail tie-down system is also available forvehicles not equipped with a RamBox.RamBox Integrated Box Side Storage BinsCargo storage bins are located on both sides ofthe pickup box. The cargo storage bins providewatertight, lockable, illuminated storage for upto 150 lbs (68 kg) of evenly distributed cargo.RamBox Cargo Storage BinsTo open a storage bin with the RamBoxunlocked, push and release the button locatedon the lid. The RamBox lid will open upward toallow hand access. Lift the lid to fully open. If you wish to carry more than 600 lbs(272 kg) of material suspended above thewheelhouse, supports must be installed totransfer the weight of the load to the pickupbox floor or vehicle damage may result. Theuse of proper supports will permit loadingup to the rated payload. Unrestrained cargo may be thrown forwardin an accident causing serious or fatalinjury.WARNING! (Continued)CAUTION!Failure to follow the following items couldcause damage to the vehicle: Assure that all cargo inside the storage binsis properly secured. Do not exceed cargo weight rating of 150 lbs(68 kg) per bin.
