MULTIMEDIA 497UCONNECT VOICE RECOGNITION QUICK TIPSIntroducing UconnectStart using Uconnect Voice Recognition (VR)with these helpful quick tips. It provides the keyVoice Commands and tips you need to know tocontrol your Uconnect system.If you see the NAV icon on the bottom bar, or inthe Apps menus, of your touchscreen, you havethe Uconnect 4C NAV With 8.4-inch Display orthe Uconnect 4C NAV With 12-inch Displaysystem. If not, you have a Uconnect 4C With8.4-inch Display system.Get StartedAll you need to control your Uconnect systemwith your voice are the buttons on your steeringwheel.1. Visit UconnectPhone.com to check mobiledevice and feature compatibility and tofind phone pairing instructions.2. Reduce background noise. Wind noise andpassenger conversations are examples ofnoise that may impact recognition.3. Speak clearly at a normal pace and volumewhile facing straight ahead. Themicrophone is located in the headliner andaimed at the driver.4. Each time you give a Voice Command, youmust first push either the VR or Phonebutton, wait until after the beep, then sayyour Voice Command.5. You can interrupt the help message orsystem prompts by pushing the VR or Phonebutton and saying a Voice Command fromcurrent category.Basic Voice CommandsThe basic Voice Commands below can be givenat any point while using your Uconnect system.Push the VR button . After the beep, say: “Cancel” to stop a current voice session. “Help” to hear a list of suggested VoiceCommands. “Repeat” to listen to the system promptsagain.Notice the visual cues that inform you of yourvoice recognition system’s status. Cues appearon the top of the touchscreen for the Uconnect3 and above the main menu bar for Uconnect4/4C/4C Nav radios.Uconnect 3 With 5-inch DisplayUconnect 4/4C/4C NAV With 8.4-inch Display9
