STARTING AND OPERATING 273 Make sure that the outer surface and theunderside of the front and rear fascias/bumpers are clean and clear of snow, ice,mud, dirt or other obstruction.When pushed, the LED on the ParkSense ActivePark Assist switch will blink momentarily, andthen the LED will turn off if any of the aboveconditions are not present.Parallel Parking Space AssistanceOperation/DisplayWhen the ParkSense Active Park Assist systemis enabled the “Active ParkSense Searching -Push OK To Switch To Perpendicular Park”message will appear in the instrument clusterdisplay. You may switch to perpendicularparking if you desire. Push the OK button on theleft side steering wheel switch to change yourparking space setting.NOTE: When searching for a parking space, use theturn signal indicator to select which side ofthe vehicle you want to perform the parkingmaneuver. The ParkSense Active Park Assistsystem will automatically search for a parkingspace on the passenger's side of the vehicleif the turn signal is not activated. The driver needs to make sure that theselected parking space for the maneuverremains free and clear of any obstructions(e.g. pedestrians, bicycles, etc.). The driver is responsible to ensure that theselected parking space is suitable for themaneuver and free/clear of anything thatmay be overhanging or protruding into theparking space (e.g., ladders, tailgates, etc.from surrounding objects/vehicles). When seeking a parking space, the drivershould drive as parallel or perpendicular(depending on the type of maneuver) to othervehicles as possible. The feature will only indicate the lastdetected parking space (example: if passingmultiple available parking spaces, thesystem will only indicate the last detectedparking space for the maneuver).SearchingWhen an available parking space has beenfound, and the vehicle is not in position, you willbe instructed to move forward to position thevehicle for a parallel parking sequence.Parking Space Found — Keep Moving Forward5
