Samsung OfficeServ 500 User Instruction

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Contents

DISPLAY SPEED DIAL NAMEThis option allows you to view the name associated with a speed dial number asit is dialed.• With you handset on-hook, press TRANSFER and then dial 110.• Press 111 to turn DISP SPDNAME on or 110 to turn it off.• Press TRANSFER to store your selection.CALLER ID REVIEW ALLThis feature allows display keyset users to review Caller ID information for callssent to their stations.This list can be from ten to fifty calls in a first in, first out basis.The list includes calls that you answered and calls that rang your station but thatyou did not answer. When reviewing this list, you can press one button to dial theperson back. The system must be using LCR to dial the stored number.• With you handset on-hook, press TRANSFER and then dial 110.• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.• Press TRANSFER to store your selection.SECURE OHVAThis option allows you to receive OHVA calls via the speaker while you are on thehandset.• With you handset on-hook, press TRANSFER and then dial 110.• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.• Press TRANSFER to store your selection.43Your keyset may be equipped with a Headset mode key. If it is so equipped press-ing this key while the light is out will cause the keyset to enter headset mode andthe light will illuminate to indicate this. Pressing the key while the light is lit willcause the keyset to return to handset mode and the light will go out.HOT KEYPADYour keyset’s keypad can be made “live”or “hot”so that it is not necessary to lift thehandset or press SPK or the MONITOR key before you begin dialing. Calls can bemade and features activated by simply dialing the C.O. line number, trunk groupaccess code, intercom number or feature access code. To activate this feature:• With the handset on-hook, press TRSF and then dial 110.• Dial 031 to turn the Hot Keypad on or 030 to turn it off.• Press TRSF to store your selection.KEY CONFIRMATION TONEYou can hear a short beep (confirmation tone) each time you press a button on thedial pad. This tone can be turned on or off.• While on-hook, press TRSF and then dial 110.• Dial 040 to turn tones off or 041 to turn tones on.• Press TRSF to store your selection.REJOINING A PAGEThis feature allows you to hear the remaining portion of an ongoing internal pageafter you return your keyset to idle. To enable this feature:• With the handset on-hook, press TRSF and then dial 110.• Dial 051 to turn this feature on or 050 to turn it off.• Press TRSF to store your selection.RING PREFERENCEThis feature automatically answers ringing calls when you lift the handset or pressthe ANS/RLS or the MONITOR key if you are using a 7B phone. This method willalways answer calls in the order they arrived at your keyset. When you turn ringpreference off, you must press the flashing button to answer a call, allowing you toanswer calls in the order you choose.• With the handset on-hook, press TRSF and then dial 110.• Dial 061 to turn ring preference on or 060 to turn it off.• Press TRSF to store your selection.42