34CUSTOMER SET RELOCATIONThis program is used to swap information associated with two stations. All assign-ments such as trunk ring, station group, station COS, station speed dial etc. will fol-low this program. 18 button keysets and 28 button keysets can be exchanged. Ifincompatible set types are selected the system will provide an ERROR: NO MATCHmessage. 18 button and 28 button key assignments should be taken in consider-ation when relocating these type of sets.The table below shows which phones canbe switched with each other.NOTE: In order to use this program it must first be activated by a technician. Pleasesee your installing company to have this done if you wish to use this program.PROGRAM KEYSUP & DOWN - Used to scroll through options.KEYPAD - Used to enter selections.SOFT KEYS - Move cursor left and right.SPK - Used to store data and advance to next program.HOLD - Used to clear previous entry.ANS/RLS - Used to select ALL.ACTION DISPLAY1. Press TRSF 315 SET RELOCATIONDisplay shows EXT _ EXT2. Enter first station number (e.g., 202) SET RELOCATIONPress RIGHT soft key to move cursor EXT 202 EXT _3. Enter second station number (e.g., 210) SET RELOCATIONPress RIGHT soft key to enter data EXT 202 EXT 2104. Display will return to STEP 1 SET RELOCATIONGo to STEP 2 EXT _ EXTOR press TRSF to store and exitprogramming.HOLIDAYThis program provides the ability to set as many as 20 different holidays. Each hol-iday will override the System Operating Mode for that particular date with a pro-grammed ring plan.PROGRAM KEYSUP & DOWN - Used to scroll through options.KEYPAD - Used to enter selections.SOFT KEYS - Move cursor left and right.HOLD - Used to clear an entry.ACTION DISPLAY1. Press TRSF and then dial 512 RING PLANDisplay shows FOLLOW12. Press the right soft key to move the RING PLANcursor to bottom half of display FOLLOW13. Enter the desired ring plan (e.g., 0-6) RING PLANDisplay will return to STEP 1 FOLLOW44. Press UP or DOWN to change display ASSIGN HOLIDAYto holiday assignment 01:5. Press the right soft key to move the ASSIGN HOLIDAYcursor to bottom half of display 01:6. Enter a desired holiday date ASSIGN HOLIDAY(e.g., 1225) 01:7. Press TRSF to store and exit ASSIGN HOLIDAYprogramming OR press SPK to store 01:1225and advance to the next program33