Samsung OfficeServ 500 User Instruction

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Contents

CUSTOMIZING YOUR KEYSETAME PASSWORDThis feature allows people using the AME feature to enable password protection.This will prevent unauthorized people from listening to your messages being left.The passcode is the same as your station passcode. This feature only applies ifthere is a SVMi card installed in the system and your keyset has a programmedAME button.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 101 to turn on AME PASSCODE or 100 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP option and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 andimmediately enter the option.• Scroll to AME password and press ENTER to change status.• Press CANCEL to return to the Main Option Page—OR—press END to returnto the idle screen.AUTO CAMP-ONThis option allows intercom calls to be automatically camped on, if possible, whena busy station is called.• With the handset on-hook, press TRANSFER and then dial 110.• Press 081 to turn CAMP-ON on or 080 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP option and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 andimmediately enter the option.• Scroll to AUTO CAMP-ON and press ENTER to change status.• Press CANCEL to return to the Main Option Page—OR—press END to returnto the idle screen.4948OHVA BLOCKYour keyset can be programmed with an OHVA Block (BLOCK) button. Pressingthis button will prevent anyone from making an OHVA to you until you press thebutton again and cancel the blocking.OHVA REJECTYour keyset can be programmed with an OHVA Reject (REJECT) button. Pressingthis button while receiving an OHVA call will disconnect the voice announcingparty and return you to your original call.IN GROUP/OUT OF GROUPIf your keyset is assigned to a station ring group, you can remove your keyset fromthe group and then put it back in. While you are out of the group, you can receivecalls to your extension number but not calls to the group number. If you have anIN/OUT button with the group number assigned.• Press the IN/OUT button. The button indicator will be lit steady when yourkeyset is in the group.• Press the IN/OUT button again to exit the group and the indicator will goblank. Repeat as necessary.If you do not have an IN/OUT button:• Dial the IN/OUT access code number ________________, then the groupnumber, then 0 to exit the group or 1 to enter the group.NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand-set or press SPEAKER button.The IN/OUT button can include an extender to indicate the specific group thatthis button will affect. This means that if you are in multiple groups, you can de-cide for which groups you will receive calls.