CHAPTER 2. MMC ProgrammingSamsung Business Communications 2-6974B[224] AUDIO PROMPTEnables to provide a prompt recorded in an Auto Attendant (AA) or a VMS card when auser responds to an alarm.No. Option Description0 STN GROUP Specifies AA/VMS group number to be connected in alarmresponse.1 PROMPT NO. Specifies the number of a prompt to be provided in alarmresponse.2 GROUP BUSY Specifies the background voice source to be called when allAAs/VMS groups to be connected are busy in alarm response. Ifset as ‘NONE’, dial tone is provided. If set as ‘TONE’, hold tone isprovided.3 RBT SOURCE Specifies AA/VMS group number to be connected in coloringservice.4 MMS SIPT GR Specifies the number of SIP Trunk group in MMS service.(This option is shown in only OfficeServ 7400.)423BDEFAULT DATANoneCONDITIONSNone424BACTION DISPLAY1) Press the [Transfer] button and [224]. AUDIO PROMPTUSUTN GROUP :NONE2) Enter the AA/VMS group number specification ([0]).Or, select the AA/VMS group number specificationby using the [Volume] button and move the cursor bypressing the [Right] Soft button.AUDIO PROMPTSTN GROUP :U NUONE3) Enter the AA/VMS group number.Or, select the AA/VMS group number by using the[Volume] button and move the cursor by pressing the[Right] Soft button.AUDIO PROMPTSTN GROUP :U 5U484) Enter the AA/VMS prompt number specification([1]).Or, select the AA/VMS prompt number specifi-cation by using the [Volume] button and move thecursor by pressing the [Right] Soft button.AUDIO PROMPTUPU ROMPT NO.:NONE