CHAPTER 2. MMC ProgrammingSamsung Business Communications 2-1137B[105] STATION SPEED DIALAllows the system administrator or technician to assign phone numbers to a station’s per-sonal speed dial locations.291BCONDITIONSEach station may have up to 50 locations (or bins) assigned to it in MMC 606(AssignSpeed Block). The speed dial bins are numbered 00~49. Each assigned phone number con-sists of a trunk or trunk group access code followed by a separator and up to 24 digits to bedialled. These dial digits may consist of 0~9, * and #. If the system recognizes a valid trunkor trunk group access number, it will automatically insert the separator.292BDEFAULT DATANONE293BPROGRAM BUTTONSB Used to insert a flash code ‘F’C Used to insert a pause code ‘P’D Used to insert a pulse/tone conversion code ‘C’E Used to mask/unmask following digits (shows as ‘[’or ‘]’)F Used to enter name for speed dial bin (see MMC 106)294BACTION DISPLAY1) Press Transfer button and enter 105.Display shows:[201] SPEED DIAL00:2) Dial station number.(e.g., 205)OR[205] SPEED DIAL0U0U:Press Volume button to select station andpress Right Soft button to move cursor.If selected station has no speed dial bins,the display will be as shown and a new station[20U 5U] SPEED DIALSPDBLK NOT EXISTmay be selected.3) Dial location number.(e.g., 05)OR[205] SPEED DIAL05:_Press Volume button to select location andpress Right Soft button to move cursor.