CHAPTER 2. MMC Programming2-386 Samsung Business Communications246B[846] WIP INFORMATIONThis MMC sets up the WIP-5000M wireless terminal information.No Parameter Description Default00 REGISTERED Shows if the terminal is registered. NO01 LOCATED Shows if the terminal is connected to the system. DETACH02 PHONE TYPE Shows the type of the terminal. NONE03 WLI NUMBER Number of WLI connected to the WBS24 servic-ing the terminal(This parameter is not shown in OfficeServ 7100/OfficeServ 7030)-04 WBS NUMBER Number of WBS24 servicing the terminal -05 IP OFFSET Location of IP pool of the terminal IP -06 IP ADDRESS Terminal IP address 0.0.0.007 MAC ADDR Terminal MAC address 0000 0000 000008 USER ID User ID per terminal PHONE NUM09 PASSWORD Password of terminal user 000010 INSERT DGT If five or more numbers are entered into the WIPterminal, this INSERT DGT is prefixed to thenumbers, provided the entered numbers do notstart with a C.O. number, C.O. group number,LCR, network LCR, or function code.-11 HO THRSH Handover Thresh Hold Value (-99~0)Thresh Hold is a signal level which makes WLANphone start scanning for handover.If this signal level is under the registered ThreshHold, WLAN phone will start scanning.This parameter has a minus value but systemonly displays the value without minus. (So thedefault value of Thresh Hold will be shown as70 not -70.)7012 HO DELTA Handover Delata Value (0~99)DELTA means the signal level difference be-tween AP which includes WLAN phone and an-other AP.If this signal level difference is over the regis-tered DELTA, WLAN phone will start to hand-over.In this case the signal level of WLAN phoneshould be under the Thresh Hold.0513 HO SCAN Handover Scan Time Value (0~99)SCAN Time is a period of scanning for WLANHandover.01