CHAPTER 2. MMC ProgrammingSamsung Business Communications 2-319221B[819] MEDIA CARD FILE CONTROLDisplays the size(in bytes) of various system program files on the Media card.Also allows deletion of a file by selecting the file and pressing the HOLD key if system isnot OfficeServ 7100.Files included in Media are described below1097BOfficeServ 7100/ OfficeServ 7030File Name DescriptionStartup.ini If user designates an MCP program in MMC 818, related data are saved in this file.This file is initially not included but is created when the above programs are se-lected at MMC 818.Sysver.inf system versionMS10Vxxx.pkg MSP driver programThis program must be included in MC card to start the system.CS10Vxxx.pkg MSP driver programThis program must be included in MC card to start the system.AP10Vxxx.pkg Appication program.MP and VM module is included in this package.DR10Vxxx.pkg This package includes SP, MGI and other drivers.RD10Vxxx.pkg RAMDISK programWS10Vxxx.pkg WEB UI programRT10Vxxx.pkg Router program (This option does not shown in OfficeServ 7030)vm_l_xxx.tar VM promptPRI TEPRI program. The TEPRI program is installed on the card itself. The oneincluded in Media Card is used for software version upgrade.(This option does not shown in OfficeServ 7030)PRI2 TEPRI2 program. The TEPRI2 program is installed on the card itself. The oneincluded in Media Card is used for software version upgrade(This option does not shown in OfficeServ 7030)Tone_db.inf Tond DB file for MGI and VM1098BOfficeServ 7400/ OfficeServ 7200File Name DescriptionSTARTUP.INI If a user designate an MP40/MCP program in MMC 818, related data are saved inthis file. This file is initially not included but is created when the above programsare selected at MMC 818.STARTUP.PRE Startup file for OfficeServ 7200 system booting.MPEVxxxx.PGM/MPPSVxxx.PGMProgram for MP40/MCP card. Since the MP40/MCP program is not installedon the MP40/MCP card itself, at least one MP40/MCP program must beincluded in Media Card to start the system.
