CHAPTER 2. MMC Programming2-288 Samsung Business Communications201B[760] ITEM COST TABLEThis MMC provides a means to assign a code to a billable item along with a 10-charactername for the item. There are a maximum of 100 entries(00 to 99) in the table with item 00reserved as the code for room deposits, 01 reserved as the code for phone deposits anditems 89 to 99 reserved for other PMS stream items.These item codes, with the exception of codes 93 to 99, will appear on the guests’ bills atcheckout and will serve to identify what each charge on the bill is for. The room bill, whenprinted, will also show telephone calls with an item designation of TEL and the name fieldwill show the number dialled. In addition to the name, up to eight of the tax codes or ratesdefined in MMC 761 can be applied to each item.1087BPRE DEFINED CODESNo Code Description00 Room Deposit This is the code used for pre-pay room deposits.01 Phone Deposit This is the code used for pre-pay phone deposits.02-88 - User-Assignable code89 W/UP SET A wake up call was set.90 W/UP ANS A wake up call was answered.91 W/UP N/ANS A wake up call was not answered.92 W/UP CANCL A wake up call was cancelled.93 Check In A guest has checked into a room.94 Check out A guest has checked out of a room.95 Available A room has been flagged as AVAILABLE.96 Occupied A room has been flagged as OCCUPIED.97 Clean Room A room has been flagged as NEEDS CLEANING.98 Fix Room A room has been flagged as NEED MAINTENANCE.99 Hold A room has been flagged as HOLD.852BCONDITIONSThis function can be used only when the Hotel function is enabled in MMC 813, HOTELOPERATION.853BENTERING CHARACTERSRefer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.854BDEFAULT DATANO ENTRIES