CHAPTER 2. MMC Programming2-358 Samsung Business Communications238B[836] H.323 GK OPTIONSProvides a means to set the H.323 gatekeeper parameters for an optional, external industry-standard H.323 network gatekeeper, using Registration, Admissions and Status signalling(RAS). The settings apply system wide.When changing IPWhen changing any IP address/value, listed below, three digits must be input foreach(octet) field. Example 192.168.1.10 input must be: 192 168 001 010This MMC is not shown in OfficeServ 7030.No Parameter Description Default00 GK CONNECTION This enables the H.323 call to connect to a gate-keeper.DISABLE01 GK ROUTING This enables routing of calls through a gatekeeper. DISABLE02 GK IP ADDRESS This is the gatekeeper’s IP address. 0.0.0.003 GK NAME This is the alphanumeric identifier of the gate-keeper.(Up to 16 characters.)‘Gatekeeper’04 ALTER GK IP ADDR This provides an alternate gatekeeper address. 0.0.0.005 H.323 GATEWAY ID This is the H.323 identifier used by the MGI whenregistering with the gatekeeper.(Up to 32 charac-ters.)‘OfficeServ’06 E.164 GATEWAYNOThis is the E.164 identifier used by the H.323 trunkwhen registering with the gatekeeper.(Up to 16digits long.)123407 GK KEEP ALIVE This is the timer that the MGI uses to acknowledgethe presence of the gatekeeper. The range is000~999 seconds.0 SEC08 GK DOWN ROUTE This provides an alternate route if the primary gate-keeper is down. Selections are PSTN or ALTERGK.PSTN09 GK RAS TYPE Select if AUTO or MANUAL, depending on yourgatekeeper’s capabilities.AUTO10 URQ REASONMODESelect ON or OFF for use of Un-register RequestRAS(URQ) messages.ON12 RRQ FAIL TIME Programs the time frame to re-send RegistrationRequest RAS(RRQ) messages to a gatekeeper.The range is 1~99.30 seconds
