CHAPTER 2. MMC ProgrammingSamsung Business Communications 2-9391B[318] DISTINCTIVE RINGINGSpecifies Ring Tone (T: RING TONE) and RING CADENCE (C: CADENCE) to identifyfrom other rings when a call is received from a specific extension or trunk line.In addition, this program can specify the priorities (PRI: PRIORITY) for each extension.This priority determines which call of waiting calls has connected first if any busy line be-comes free when all member’s lines of the called extension group are busy and severalcalls are waiting. (PRI: ‘1’ has the highest priority.)No. Option Description1 DGP TONE Specifies the ring tone of a digital phone (1-8).2 SLT RING Specifies the ring cadence of a regular phone (1-5).3 PRIORITYThis option determines which call of waiting calls has thehighest priority to be connected if a busy line becomes freewhen all members’ lines of the called extension group arebusy and several calls are waiting (1-9).PRIORITY 1 has the highest priority.4 VM RBACK Specifies the use of the coloring service by using a VMSmessage according to extensions (YES/NO).480BCONDITIONSy Digital phones identifies rings by using ring tone. If the ‘T’ of a calling party’s exten-sion/trunk line is specified as F-STN, ring is generated by Program 111 of the calledparty’s extension. If specified as 1-8, the incoming ring is generated as the specifiedtone.y Regular phones identify rings by using ring cadence. If the ‘C’ of a calling party’s ex-tension/trunk line is specified as F-STN, ring is generated according to the cadence ofProgram 510 depending on the type of the calling parties. If specified as 1-5, the typeof calling parties is ignored and the following ring cadence is used:At this time, the ring cadence is specified in Program 510.No. Ring Cadence (C : CADENCE) Ring Type0 STN RING (Extension Ring)1 TRK RING (Trunk Ring)2 ALM RING (Alarm Ring)3 DOOR RING (Door ring)4 CBK RING (Call Back Ring)
