CHAPTER 2. MMC Programming2-378 Samsung Business Communications244B[842] SIP STATION INFORMATIONThis MMC provides a means of registering the SIP with the OfficeServ 7000 series system.No. Parameter Description0 REGISTERED This indicates whether the corresponding standard SIP terminal isregistered.IP ADDRESS IP address of IP phone0 USER ID When phone is registered, user ID for checking user2 USER PSWD When phone is registered, user password for checking userTONE SRC Designate whether to use the holding tone of the system or to usethe holding tone of the SIP terminal when connecting the call viathe SIP terminal.0. USE SYSTEM TONE = Use the tone of the system for the hold-ing tone and for the ring back tone in some ring back status(CALLBACK, etc.). When using the tone of the system, in case ofthe calls which do not use the MGI such as the call between theSIP terminals or the call with the IP phone, the holding tone (ringback tone) is emitted by allocating the MGI.1. USE SIPP TONE = Use the own tone of the SIP terminal.CALL WAIT This indicates whether to receive the second call without treating itas the busy status when the second call is received in the SIP ter-minal. (DISABLE / ENABLE)8 PHONE TYPE This indicates the manufacturer of the standard SIP terminal.In case of the terminals other than the Samsung standard SIP ter-minals, registration is limited to the number allocated according tothe LICENSE KEY entered in the MMC841.(DISCONNECTED / SAMSUNG SIPP / NON SAMSUNG SIPP)996BDEFAULT DATAParameter DefaultREGISTERED YESIP ADDRESS -USER ID Initial IP Phone Number(e.g., 3601)USER PSWD 0000TONE SRC USE SYSTEM TONECALL WAIT DISABLEPHONE TYPE SAMSUNG
