CHAPTER 2. MMC ProgrammingSamsung Business Communications 2-293204B[763] SECOND LCRThis MMC allows the technician to input the Extended LCR information table.Max table index is 200. This table have translation and route information for input digits.The last table(index 200) has only ‘NEXT ROUTE’ option. This is used for the case thereare no matching table for user input digits. NEXT ROUTE option can be set by LCR ortrunk group as follows.Option Description DefaultIN DIGIT Define user input digits after E-LCR code(Max 16 digits)-OUT DIGIT Outgoing digits(these digits will be sent instead of input digits) (Max16 digits)-USE LCR NUM Select which E-LCR code(E-LCR1, E-LCR2, E-LCR3, E-LCR4)used for this table index.ALLNEXT ROUTE Select ‘LCR’ or trunk group to seizure.‘LCR’ means that MMC710 LCR DIGIT table will be used withoutgoing digits(OUT DIGIT).LCR866BCONDITIONSMMC724 FEATURE CODE: E-LCR1, E-LCR2, E-LCR3, E-LCR4 addition867BDEFAULT DATASEE DESCRIPTION868BACTION DISPLAY1) Press Transfer button and enter 763.Display shows:(U 0U 01)IN DIGIT2) Dial Table number 001-200.OR(001)U IU N DIGITPress Volume button to select Table number andpress Right Soft button to move cursor.3) Enter IN DIGIT maximum 16 digits, and pressRight Soft button to move cursor.(001)U IU N DIGIT12344) Enter OUT DIGIT option number([1]).OR(001)OUT DIGITPress Volume button to select OUT DIGIT and pressRight Soft button to move cursor.