CHAPTER 2. MMC Programming2-104 Samsung Business Communications97B[400] CUSTOMER ON/OFF PER TRUNKAssigns several options(listed below) on a per-trunk basis.No Option Default Description0 1A2 EMULATION OFF When this option is set to ON up to 4 internal stationscan participate in a conversation on this trunk bypressing the trunk key.1 TRUNK INC DND OFF When this option is set to ON a trunk that isprogrammed to ring a specific station(a private line orDIL) will ring at that station if the station is in DND.2 TRUNK FORWARD ON When this option is set to OFF this trunk will not follow aringing stations call forwarding.3 LCR ALLOW OFF Allows LCR to be switched ON/OFF when a trunk isaccessed using a DT key or by dialling its port number(e.g., 701).6 EFWD EXT CLI ON This option determines what kinds of CLI number will besent to the external forwarded outgoing call.(Station orReceived CLI from Trunk)7 REPEAT CLI ON This option determines what kinds of CLI number will besent to the trunk to trunk call.(Trunk or Received CLIfrom Trunk)8 TONECHK DISC OFF When this option is set to ON, loop trunk can be discon-nected by detecting busy tone.(To use this feature, theLP TRK TONE DISC option in MMC 861 must be set toENABLE.)9 AUTO ANSWER OFF When this option is set to ON, Auto Answer mode canbe assigned on a per-trunk basis.10 COLORING AS OFF To provide coloring, and not ring back tone, a channelshould be connected when a trunk line call is received.For a trunk line call that no channel is connected, thisoption determines if the coloring service is provided bysending the ANSBACK message.11 TANDEM CLI ON When this option is set to ON, “0" is attached in front ofthe Caller ID received for a trunk line Tandem call.
