Xerox WorkCentre C226 User Manual

Also see for WorkCentre C226: Quick connect guide Quick start guide System administration guide

Contents

Xerox WorkCentre C226 User Manual Manual pdf 112 page image

2-8 Xerox WorkCentre C226 User GuideCopier OperationAutomatic copy image rotation - rotation copyingIf the orientation of the originals and copy paper are different, the original image will beautomatically rotated 90° and copied. (When an image is rotated, a message will bedisplayed.) If a function is selected that is not suitable for rotation, such as enlargingthe copy to greater than A4 (8-1/2" x 11") size or staple sorting with the Saddle StitchFinisher, rotation will not be possible.[Example]This function operates in both the auto paper select or auto image mode. (Rotationcopying can be disabled with a key operator program.)Selecting the Original SizeWhen the correct original size is not detected or the original size is not displayed, youcan manually specify the original size.By causing the machine to recognize the original size, you can have the automaticratio selection function (page 2-28) automatically set a suitable enlargement or reduc-tion ratio for the selected paper size.Place the original in the DADF tray or on the document glass and then follow the stepsbelow.1. Touch the Original tab.Orientation of original Orientation of paper Copy after rotationFace down Face down