1-14 Xerox WorkCentre C226 User GuideGeneral InformationOperation panelTouch panel The machine status, messages and touch keys are displayed on the panel. Selectionsmade with the keys are confirmed by a "beep"* that is sounded when a key is touched,and highlighting of the selection key.* If a key that cannot be selected is touched, double-beep will sound.Keys that are greyed out cannot be selected.When using the touch panel, first change the display to the mode that you wish to use:printer mode, copy mode, network scanner mode* 1 , or fax mode*2 . For details seepage 1-16.Mode selectkeys and indicatorsUse to change modes and the corresponding display on the touch panel.[PRINT] key/READY indicator/DATA indicatorPress to enter the printer mode.READY indicator Print data can be received when this indicator is lit.DATA indicator Lights up or blinks when print data is being received. Also lights up or blinks when themachine is printing.[IMAGE SEND]key/LINE indicator/DATA indicatorPress this key to switch the display between network scanner mode* 1 and fax mode*2 .(See the sections for network scanner and fax.)[COPY] key Press to select the copy mode. If this key is pressed and held while the main screen ofthe copy mode is displayed, the total output count will be displayed./1 23 4 65 7 8 9 10 11/
