4-34 Xerox WorkCentre C226 User GuideNetwork Scanner OperationScanning SettingsWhen sending an image, you can adjust the original size, exposure, resolution, andfile format settings as needed.Manually Setting the Scanning SizeIf you load an original that is not a standard size (such as an inch size), or if you wishto change the scanning size, touch the [ORIGINAL] key and set the original size man-ually.Perform the following steps after loading the document in the DADF or on the docu-ment glass.NOTE: Standard sizes that can be detected are as follows:A3, B4, A4, A4R, B5, B5R, A5. (11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2")If a non-standard size original is loaded (including special sizes), the closest standardsize may be displayed, or the original size may not appear at all.1. Touch the [ORIGINAL] key.2. Touch the [MANUAL] key.The sizes that can be selected are displayed.[AUTO] is no longer highlighted. [MANUAL] is high-lighted.NOTE: If you wish to rotate the original 90° when creating an image file, click the "ROTATETHE IMAGE 90 DEGREES" checkbox (a checkmark should appear in the box).Auto A4OriginalLowerResolutionProgrammedFile FormatManualuto1-SidedO2-SidedBookletRotate The Image 90 Degrees2-SidTableOriginal Size
