Xerox WorkCentre C226 User Guide 4-14 Network Scanner OperationIntroductionAn option is available that enables the machine to be used as a network scanner. Thissection explains only the network scanner functions of the product. For information onloading paper, replacing toner cartridges, clearing paper misfeeds, handling peripheralunits, and other copier-related information, please refer to Chapter 1, “General Infor-mation” and Chapter 2, “Copier Operation”.NOTES: • Before using the network scanner feature, several settings must be establishedfrom the Web page. These settings are explained from page 4-3 on. The settingsmust be established by the network administrator. Such settings must be effectedby the system administrator who has the special network related backgrounds.• The explanations in this section assume that the person who will install theproduct and the users of the product have a working knowledge of MicrosoftWindows.• For information on the operating system, please refer to your operating systemmanual.• This section assumes that several options have been installed.Options required to use the network scanner function• Scan kit• MemoryTo use the network scanner function in colour up to 300 dpi or B/W mode up to600 dpiFor printer controller: Add one 256-MB module
