Using an Extension PhoneXerox WorkCentre C226 User Guide 5-61Using the F-Code Relay Request Function(your machine requests a relay broadcast)Ask the operator of the other F-Code machine (the relay machine) to create an F-Code relay broadcast memory box that contains the end receiving machines to whichyou wish to send a fax, and ask for the sub-address (SUB) and passcode (SID) of thatbox.When you dial the relay machine to send the fax, enter the sub-address and passcodeafter the fax number. The fax will be stored in the relay machine's memory box, andthe relay machine will call each of the programmed end receiving machines and relaythe fax to those machines. (If a passcode (SID) is not programmed in the memory box,enter only the sub-address when dialing.)Aside from the method of dialing the relay machine, the transmission procedureis the same as for a normal transmission.Refer to “Entering (Dialing) a Fax Number with a Sub-Address and Passcode”on page 5-51 for the procedure for entering a sub-address and passcode afterthe fax number of the other machine.Convenient Methods of UseThis section explains functions that widen the scope of use of the fax machine.Please read those sections that are of interest to you.Using an Extension PhoneYou can connect a telephone to the machine and use it as an extension phone toplace and receive calls like any normal phone. You can also activate fax receptionfrom the phone (remote operation).NOTE: If you connect a combination telephone/answering machine to the machine, you willnot be able to use the answering machine function.
