Sending a FaxXerox WorkCentre C226 User Guide 5-23Faxing a Two-Sided OriginalFollow the steps below to automatically send a two-sided document.1. Make sure the machine is in fax mode.When the [IMAGE SEND] key light is on, the machine isin fax mode. If the light is not on, press the [IMAGESEND] key.When the network scanner option is installed, touch thiskey to return to the initial screen of fax mode or scannermode, whichever mode was selected last. (Pressing the[IMAGE SEND] key in a copy screen or printer screenreturns you to the initial screen of fax mode.) To switch to fax mode from scannermode, touch the [SCANNER/FAX] key (see 8 on page 5-7).2. Place the original in the DADF tray (see“Using the DADF” on page 5-11).3. Touch the [ORIGINAL] key.If the address directory screen appears, touch the [CON-DITION SETTINGS] key to display the condition settingsscreen.When you touch the [ORIGINAL] key, check the originalsize that appears in the key. If the size was not detectedcorrectly, specify the correct size. (See “ManuallySetting the Scanning Size” on page 5-13.)4. Touch the [2-SIDED BOOKLET] key or the [2-SIDED TABLET] key as appropriatefor the original you loaded.5. Touch the [OK] key.You will return to the initial screen./Auto A4OriginalStandardResolutionEXPOSUREManualOk2-SidedBooklet2-SidedTabletSpeaker Redialal SizeRedialOkkerED 2 SIDEDL
