User Maintenance (for copying)Xerox WorkCentre C226 User Guide 2-812. Open and close the DADF cover.Opening and closing the cover clears the misfeed dis-play. Copying cannot be resumed until this step is per-formed.A message may appear indicating the number of originals which must be returnedto the DADF tray. Return the originals to the DADF tray and press the [START] keyfor colour or black and white copying as appropriate for the job being resumed.User Maintenance (for copying)To ensure good service from this product over a long period of time, it is recommendedthat the following maintenance procedures be performed on a regular basis.CAUTION Do not use flammable spray to clean the machine. If gas from the spray comes incontact with hot electrical components or the fusing unit inside the machine, fire orelectrical shock may result.Wipe with a clean, soft cloth.If necessary, moisten the cloth with water or a smallamount of neutral detergent. When finished, wipe drywith a clean cloth.NOTE: When cleaning, do not use thinner, benzene, or similar volatile cleaning agents. Thesemay degrade or discolour the housing.If you find that a dirty image results when a copies aremade using the DADF, wipe the original scanning area(the area that contains the long narrow glass shown atleft).
