4-18 Xerox WorkCentre C226 User GuideNetwork Scanner OperationProtecting Information Programmed in the Web Page("Passwords")Passwords can be set to restrict Web page access and protect settings. Note that it isnot necessary to set passwords; the network scanner functionality can also be usedwithout passwords.A password can be set for the administrator and passwords can be set for each user. Ifyou use a user password to access the Web page, you will be able to establish, edit,and delete destinations in the Scanner Destination Management menu; however, youwill not be able to establish settings in the Setup menu.The passwords for "user" and "admin" are both initially set to "Xerox". If you wish tochange the passwords when first establishing the settings, enter "Xerox" in "Old AdminPassword" before you establish the settings. A password must consist of alphanu-meric characters and be no more than seven characters long. Passwords are casesensitive. After entering a password, click "Submit" to set it. After setting the password,turn the machine power off and then back on.When a password is set, you will be prompted for the password when you attempt toaccess a Web page with protected settings. For the "User name", enter "user" if youare accessing the page as a user, or "admin" if you are accessing the page as anadministrator. For detailed information on setting passwords, refer to "Help".Condition Setting Screen of ScannerModeThe condition setting screen of scanner mode is displayed by pressing the [IMAGESEND] key (refer to page 1-14) while the print mode, copy mode, or job status screenappears in the touch panel*1. In the explanations that follow, it is assumed that the ini-tial screen that appears after pressing the [IMAGE SEND] key is the condition settingscreen (shown below). If you have set the display to show the address directory(page 4-21) when the [IMAGE SEND] key is pressed, touch the [CONDITION SET-TINGS] key in the address directory to display the condition setting screen.The key operator program "Default display settings" can be used to set the display toshow either the condition setting screen (shown below) or the Address directoryscreen (page 4-21) when the [IMAGE SEND] key is pressed (refer to page 4-66).
