1-60 Xerox WorkCentre C226 User GuideGeneral InformationUsing the Saddle Stitch FinisherTouch the [More...] key in the Output display on the main screen of copy mode to dis-play the screen that allows selection of sort, staple sort, centreline stapling, groupfunction, and the output tray.[GROUP] key When Group is selected, all copies of the same original will be grouped.[STAPLE SORT]keyWhen Staple Sort is selected, sorted sets will be stapled and delivered to the offsettray. (They will not be offset stacked.)[SORT] key When Sort is selected, sets of copies will be sequentially delivered.[FINISHERTRAY] keyWhen the offset function is selected, output goes to the offset tray. (The offset tray isautomatically selected when the staple sort function is turned on.)[OFFSET] key The offset function operates when "Yes" is selected, and doesn't operate when "No" isselected. (The offset checkmark is automatically cleared when the staple sort functionis turned on.)[CENTRE TRAY]keyIf the centre tray is selected, output paper will be delivered to the exit tray locatedabove the main unit.[OK] key Touch to close the [OUTPUT] screen and to return to the main screen.[SADDLESTITCH] keyWhen saddle stitching is selected, the copies will be stapled at the centre and deliv-ered to the saddle stitch tray.Touch this key to display the pamphlet copy setting screen (page 2-71). (This is onlypossible when a checkmark appears in the checkbox of the [AUTOMATIC SADDLESTITCH] key operator program)[PUNCH] key If the Saddle Stitch Finisher is equipped with a hole Punch Module, printed paper canbe hole punched and delivered to the offset tray.* When one of the functions is selected, it is highlighted.Output OKSaddleStitch PunchFinisherTrayCentreTrayStapleSortSortGroupOffset
