Notice Page PrintingXerox WorkCentre C226 User Guide 3-654. Touch the [NIC PAGE] key.PROCESSING PRINT DATA appears in the messagescreen and printing begins. To cancel printing, touch the[CANCEL] key.AppendixThis section contains product specifications and other technical information.Notice Page PrintingA notice page will be printed when the current print job cannot be run due to a systemlimitation and an explanation of the limitation is too lengthy to be shown in the mes-sage display. A notice page will describe the limitation and other possible ways insteadof possibilities to run the job.A notice page will be printed in the following cases.• When the print data of a single job is so large that it cannot be held in memory.(When there are other jobs occupying memory, notice pages may tend to beprinted more frequently even for jobs with small amounts of data.)• When a print job is sent to the printer and the number of print hold jobs hasreached the maximum of 99 jobs.• When different paper sizes have been selected for printing within a print job andone or more of the sizes cannot be delivered to the selected exit tray or to the sta-pler compiler. In these cases printed paper will be delivered partly to the specifieddestination (tray or compiler) and partly to another exit tray.• When a function is selected that has been disabled using the key operator pro-grams, such as disabling of two-sided printing, disabling of the staple function, ordisabling of a specified exit tray.• An invalid account number is entered when the auditing mode has been set.Disabling of notice page printingYou can use the "PROHIBIT NOTICE PAGE PRINTING" of the key operator programto disable notice page printing (see page 3-55).PrinterSettings ListNIC PagePCL
