Normal CopyingXerox WorkCentre C226 User Guide 2-193. Touch [OFFSET].4. Touch [OK].Selecting the output trayWhen the [LEFT TRAY] key in the above illustration is highlighted, copies are output tothe tray on the left side of the machine (the left tray). When the [CENTRE TRAY] key ishighlighted, copies are output to the centre tray. Touch the key of the tray you wish touse for copy output.Turning on the offset functionThe offset function operates when a checkmark appears in the [OFFSET] checkbox,which is displayed by touching the [CENTRE TRAY] key. (If a checkmark doesn'tappear, touch the checkbox.)Offset width: Approximately 30 mm (1-3/10")(A3W (12" x 18") paper cannot be offset.)Automatic two-sided copying from the DADFWhen a Duplex Module/2-Tray Unit and a Duplex Bypass/Inverter Unit are installed,the following automatic two-sided copy functions are possible. The copy paper isturned over automatically, allowing easy two-sided copying.NOTE: Certain restrictions exist depending on the amount of memory installed and the copysettings. (See “Copy mode output restrictions” on page 2-16 and “Guidelines for thenumber of scannable originals during sort copying” on page 2-17.)InterruptReady To Copy.0OKOutputSortGroupOffsetCentreTrayLeft Tray
