Printer Configuration Through the NetworkXerox WorkCentre C226 User Guide 3-43GroupMultiple e-mail destinations can be stored in one of the one-touch keys displayedin the touch panel. This is called storing a group. When sending an e-mail, thestored destinations can be selected by simply touching the one-touch key. This isconvenient when you wish to send the same e-mail to multiple destinations.SenderThe sender of E-mail transmissions from the network scanner is configured. Thesender will be set as the "From" item of the E-mail header. Up to 20 senders can beregistered and a sender can be selected among them from the operation panel.Network ScanningSetupBasic setting screen for the network scanner. E-mail subject for scanner delivery,file name, etc. are set. To use the network scanner, you must set up SMTP Setupand DNS Setup. This screen displays the SMTP and DNS settings and provides alink to SMTP Setup and DNS Setup.Custom DirectoryUser index names in the display list on the operation panel are set.Device SetupInformationConfigure machine identification information for the status & alert E-mail function.PasswordThe settings and programmed information in the Web page can be protected by click-ing [Passwords] in the menu frame and establishing passwords. The administratorshould change the initial password set at the factory to a new password. In addition,take care to remember the new password, as it must be entered the next time youopen the Web page.Two types of passwords can be established: one for users and one for the administra-tor.When the Web page is accessed using the user password, the "Device Setup" and"Network Setup" cannot be configured.The password is initially set to "Xerox". When you first establish the passwords, enter"Xerox" in "Administrator Password" and then enter the new password for the adminis-trator and the password for users (maximum of 7 characters per password; passwordsare case sensitive). Click [Submit] to save the new passwords. After setting the newpasswords, turn off and then turn on the machine power.The next time you open the Web page, you will be prompted to enter your password.When accessing the Web page as a user, enter "user" in "User Name". When access-ing the Web page as an administrator, enter "admin" in "User Name".
