4-68 Xerox WorkCentre C226 User GuideNetwork Scanner Operation• The "ONE PAGE PER FILE (YES/NO)" setting is used to select how files are cre-ated when multiple pages are scanned. Select "YES" to have an individual file cre-ated for each scanned page (so that multiple files are created). Select "NO" tohave all scanned pages combined into a single file.• The initial settings for the above programs are as follows• Black and white scanningFile type: PDFCompression mode: HIGH (G4)One page per file: No• Colour scanningFile type: PDFCompression mode: MEDIUMOne page per file: NoMaximum size of e-mail attachmentsTo prevent the size of image files transmitted by Scan to E-mail from becoming toolarge, you can set a size limit.If the total size of the image files created by scanning the original exceeds the limit, theimage files are discarded. The limit can be set from 1 MB to 10 MB in increments of 1MB. The initial setting is 2 MB. The limit cannot be disabled.Scanner mode timeout after last scanIf no action is taken after scanning an original from the document glass, transmissionof the original will begin automatically after the time set with this program. The timecan be set from 0 to 60 seconds in increments of 10 seconds. When "0" is selected,transmission begins immediately after scanning from the document glass ends. Thedefault setting is 60 seconds. This setting cannot be disabled.Default exposure settingsThis program is used to configure the default exposure settings.The default settings are initially configured as follows:• Exposure: AUTO• Original type: TEXT• MOIRÉ REDUCTION: Not selectedTo change the "MOIRÉ REDUCTION" setting, touch the checkbox.When the exposure is set to "AUTO", the original type can be set to [TEXT/PRTD.PHOTO], [TEXT/PHOTO], or [TEXT].
