3-46 Xerox WorkCentre C226 User GuidePrinter OperationDefault settingsThe default settings are used to set specific print conditions for printing in an environ-ment where the print driver is not used (such as printing from MS-DOS or from a com-puter that does not have the provided print driver installed).NOTE: When some items can be set both in the printer driver and on the operation panel, thevalues set in the printer driver override those set on the operation panel. For items thatcan be set in the printer driver, perform the settings in the printer driver.The following settings are available:CopiesCOPIES sets the number of print to make.Default setting: 1The number of copies can be set from 1 to 999.OrientationORIENTATION allows portrait orientation or landscape orientation to be selected forprinting.Default setting: PORTRAITPORTRAIT or LANDSCAPE can be set.Default paper sizeThe paper size to be used for printing under normal conditions is set.Printing will be performed on the specified size of paper unless otherwise specified.Default setting: A4 or 8-1/2X11A3W, A3, B4, A4, B5, A5, 11X17, 8-1/2X14, 8-1/2X13, 8-1/2X11, 7-1/4X10-1/2, 5-1/2X8-1/2, 8K or 16K can be set.Default output trayThe output tray to be used for printing under normal conditions is set. Printed sheetswill be output to the specified tray unless otherwise specified by application software.Default setting: CENTRE TRAYThe trays that can be selected depend on installation of peripheral devices.
