Custom SettingsXerox WorkCentre C226 User Guide 1-375. Touch the type of envelope, and go to step 7.6. If you inserted a non-standard size of paper in the Bypass Tray, remove thecheckmark from "ENABLE AUTO SIZE DETECTION" and then touch the [EXTRASIZE] tab. When the screen opens, the X key will be highlighted. Use the andtouch keys to enter the X dimension. If you inserted a standard size of paper inthe Bypass Tray, make sure that a checkmark appears in the [ENABLE AUTOSIZE DETECTION] checkbox.Next touch the key to highlight it and enter thedimensions for Y.The permitted range for the X dimension is 139 to 432mm (5-1/2 to 17 inches), and the permitted range for theY dimension is 100 to 297 mm (4 to 11-3/4 inches).7. Touch the [OK] key to complete the setting.Custom SettingsThe items that can be set with the custom settings are shown below.Total count The number of pages processed by the machine andoptional equipment can be displayed. (See page 1-40.)Display contrast Used to adjust the contrast of the operation panel display.(See page 1-41.)List print Used to print a list of machine settings. (See page 1-41)Clock adjust Used to set the date and time of the built-in clock of themachine. (See page 1-39.)Com-10MonarchOKDLC5Enable Auto Size DetectionExtra Size Basic SettingXY139100 (100 297)mm(139 432)mmBasic SettingExtra SizeOK
