12 Using Scan Service114Using Scan Service12Configuration of Scan to FTP/SMBPreparationsPrepare the following to use the Scan to FTP/SMB feature.Using with FTPWhen using with FTP transmission, one of the following FTP servers and an accountto FTP servers (login name and password) are required.z Microsoft Windows Server 2003FTP service of Microsoft Internet Information Server 6.0z Microsoft Windows NT Server 4.0, Microsoft Windows 2000 Server, MicrosoftWindows NT Workstation 4.0, Microsoft Windows 2000 Professional, or MicrosoftWindows XPFTP service of Microsoft Internet Information Server 3.0 or laterz Mac OS XFTP service of Mac OS X 10.1.5/10.2.x/10.3.5/10.3.6z Novell NetWareFTP service of NetWare 5.11 or 5.12Refer to the manual provided with the software for how to configure the FTP service.Using with SMBWhen using with SMB transmission, a computer running on the following OS whichincludes a shared folder function is required.z Microsoft Windows 98z Microsoft Windows Mez Microsoft Windows NT 4.0z Microsoft Windows 2000z Microsoft Windows Server 2003** Active Directory must not be installed.z Microsoft Windows XPInstallation OverviewThis section describes the configuration procedure to use Scan to FTP/SMB on themachine.The following is the procedure to use the Scan to FTP/SMB feature.z Enabling Port and Setting TCP/IPEnable the FTP port and SMB port, and then set the machine's IP address.z Preparing a FTP folder or SMB folderCreate a folder for transmission destinations on the computer.Note • When using with SMB, an only local user can create a folder. A domain user cannot create.
