Xerox apeosport 550 I Network Administration Manual

Contents

Xerox apeosport 550 I Network Administration Manual Manual pdf 125 page image

Installation Procedure123Using the iFax Service13Installation ProcedureInstallation OverviewThis section describes the configuration procedure to use the iFax feature on themachine.The following is the procedure to use the iFax feature.z Enabling the port and Setting TCP/IPEnable the ports which are used for the iFax feature, and set an IP address of themachine.z Configuring the e-mail environmentConfigure the items for the iFax feature on the machine.Note • Configuration can also be performed using CentreWare Internet Services.Enabling the Port and Setting TCP/IPFirst enable the ports for the e-mail feature, then set the IP address. The procedure forsetting the machine is as follows.Note • The configuration can also be performed using CentreWare Internet Services.For information on how to use CentreWare Internet Services, refer to "Using CentreWare InternetServices" (P.65).1 Display the [System Administrator Menu] screen.1) Press the button.2) Enter the user ID using the numeric keypad or a keyboard displayed by pressing[Keyboard], and select [Confirm].Note • The default user ID is "11111". When using the Authentication feature, a password isrequired. The default password is "x-admin".3) Select [System Settings].2 Enable the ports which are used for E-mail.1) Select [System Settings].2) Select [Network Settings].3) Select [Port Settings].4) Select [Receive E-mail] and then select [Change Settings].5) Select [Port Status] and select [Change Settings].6) Select [Enabled] then select [Save].7) Select [Close] repeatedly until the [Port Settings] screen is displayed.8) Enable the [Send E-Mail - Port] as above.9) Select [Close] repeatedly until the [Network Settings] screen is displayed.