Xerox apeosport 550 I Network Administration Manual

Contents

Xerox apeosport 550 I Network Administration Manual Manual pdf 45 page image

Installation Procedure43Installation When Using USB Port43 Configure the following items as necessary.z Print ModeConfigure the print language on the machine to match the received data.z PJLEnable when receiving a job using PJL commands.The PJL commands are independent of any print languages. A print language usedin the next data can be set independently of the current print language.z Auto Eject TimeConfigure the time that the data so far received by the machine will automatically beprinted since data is no longer sent to the printer.z Adobe Communication ProtocolConfigure the protocol defining the communication method between PostScriptprinters and a host.Note • Adobe Communication Protocol can be configured when the PostScript 3 Kit (optional) isinstalled.4 Select [Close] repeatedly until the [System Settings] screen is displayed.5 Select [Exit].6 After the machine is restarted, print out a settings list to confirm that the USB port isenabled.For information on how to print a settings list, refer to "Print Report/List" under "Chapter 13 MachineStatus" in the User Guide.Configuration on the ComputerThe following describes the configuration procedure for the computer.In order to print from the machine, the computer needs to have a print driver installed.For information on the supported operating systems, refer to "Supported Operating Systems" (P.19).For information on the driver installation procedure, refer to the manual contained in the CentreWareUtilities CD-ROM.You can also print from a Macintosh using USB. You will need an optional PostScript 3 Kit. Refer to themanual contained in the CD-ROM provided with the kit for the print driver installation procedure.