Xerox apeosport 550 I Network Administration Manual

Contents

Xerox apeosport 550 I Network Administration Manual Manual pdf 56 page image

7 Installation When Using Microsoft Network (SMB)54Installation When Using Microsoft Network (SMB)7PreparationsPrepare the following items to use the machine when using a Microsoft Network (SMB).z TCP/IP or NetBEUI network environmentz CentreWare Utilities CD-ROM (provided with the machine)Installation ProcedureInstallation OverviewThe machine can be connected to computers using Microsoft Networks (SMB).Depending on the network environment, the machine may need to be configured withan IP address, subnet mask and gateway address. Confirm with the networkadministrator and set up the necessary items.The following is the procedure to connect the machine to a Microsoft Network (SMB).z Configuration on the machineEnabling the SMB port on the machine and configuring TCP/IP.z Configuration on the computerInstalling a print driver.Configuration on the MachineThe following describes the configuration procedure to connect the machine toMicrosoft Networks (SMB). First enable the SMB port, then set the TCP/IP settings.Note • The configuration can also be performed using CentreWare Internet Services orCentreWare Utilities.For information on how to use CentreWare Internet Services, refer to "Using CentreWare InternetServices" (P.65).1 Display the [System Administrator Menu] screen.1) Press the button.2) Enter the user ID with the numeric keypad or a keyboard displayed by pressing[Keyboard], and select [Confirm].Note • The default user ID is “11111”. When using the Authentication feature, a password isrequired. The default password is “x-admin”.3) Select [System Settings].2 Enable the SMB port.1) Select [System Settings].2) Select [Network Settings].3) Select [Port Settings].4) Select [SMB], and select [Change Settings].5) Select [Port Status], and select [Change Settings].6) Select [Enabled], then select [Save].7) Select [Close] repeatedly until the [Network Settings] screen is displayed.