4 Installation When Using USB Port42Installation When Using USB Port4PreparationsPrepare the following items to install the machine when using a USB interface.z USB cablez CentreWare Utilities CD-ROM (provided with the machine)z USB 2.0 kit (optional)z PostScript 3 Kit (optional: when using Macintosh)Installation ProcedureInstallation OverviewThe machine can be connected directly to a computer using a USB cable.The following is the procedure to use a USB interface.z Configuration on the machineConfiguring the USB port on the machine.z Configuration on the computerInstalling a print driver.Configuration on the MachineThe following describes the configuration procedure to use a USB interface on themachine.Note • The configuration can also be performed using CentreWare Internet Services.For information on how to use CentreWare Internet Services, refer to "Using CentreWare InternetServices" (P.55).1 Display the [System Administrator Menu] screen.1) Press the button.2) Enter the user ID with the numeric keypad or a keyboard displayed by pressing[Keyboard], and select [Confirm].Note • The default user ID is “11111”. When using the Authentication feature, a password isrequired. The default password is “x-admin”.3) Select [System Settings].2 Display the USB port configuration screen.1) Select [System Settings].2) Select [Network Settings].3) Select [Port Settings].4) Select [USB], and select [Change Settings].5) Select [Port Status], and select [Change Settings].6) Select [Enabled], then select [Save].
