Network Setting Items (Port/Protocol) for CentreWare Internet Services71Using CentreWare Internet Services10ParallelThis section describes the settings for the parallel interface.1 Start a web browser.2 Enter the machine's IP address or the Internet address to the address entry column onthe web browser, and press the key.z Example of the IP address entryhttp://192.168.1.1/z Example of the Internet address entryhttp://xxx.yyyy.zz.vvv/Note • When specifying a port number, add “:” and a port number to the end of the Internet address.3 Click the [Properties] tab.4 Click [+] on the left of [Port Settings] to display the items in the folder.5 Click [Parallel].6 Select the [Enable] check box to enable [Bi-Directional Communications].7 Set [Auto Eject Time].8 Set the protocol using the [Adobe Communications Protocol] pull-down menu.Note • Adobe Communication Protocol can be set only when an optional PostScript 3 Kit isinstalled.9 Reflect the values as the machine's setting values.1) Click the [Apply New Settings]. A screen to enter the user name and password willbe displayed.2) Enter the System Administrator user ID and password into [User Name] and[Password], and then click [OK].Note • The default user ID is “11111” and password is “x-admin”.3) The right frame on the web browser will change to the machine reboot display.4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
