Xerox apeosport 550 I Network Administration Manual

Contents

Xerox apeosport 550 I Network Administration Manual Manual pdf 48 page image

5 Installation When Using TCP/IP (LPD/Port 9100)46Installation When Using TCP/IP (LPD/Port5PreparationsPrepare the following items to install the machine when using a TCP/IP (LPD/Port9100) protocol.z TCP/IP network environmentz CentreWare Utilities CD-ROM (provided with the machine)z PostScript 3 Kit (optional: when using Macintosh)Installation ProcedureInstallation OverviewThe machine can be connected to a computer using a TCP/IP (LPD/Port 9100)protocol.The following is the procedure to use a TCP/IP(LPD/Port 9100) protocol.z Configuration on the machineConfiguring TCP/IP (LPD/Port 9100) on the machine.z Configuration on the computerInstalling a print driver.Configuration on the MachineThe following describes the configuration procedure to use a TCP/IP (LPD/Port 9100)protocol on the machine. Enable a LPD Port/Port 9100 port, then assign an IP address.Note • The configuration can also be performed using CentreWare Internet Services orCentreWare Utilities.For information on how to use CentreWare Internet Services, refer to "Using CentreWare InternetServices" (P.55).1 Display the [System Administrator Menu] screen.1) Press the button.2) Enter the user ID with the numeric keypad or a keyboard displayed by pressing[Keyboard], and select [Confirm].Note • The default user ID is “11111”. When using the Authentication feature, a password isrequired. The default password is “x-admin”.3) Select [System Settings].2 Enable either the LPD port or the Port 9100 port as appropriate. In this example, theLPD port is enabled.1) Select [System Settings].2) Select [Network Settings].3) Select [Port Settings].4) Select [LPD], and select [Change Settings].5) Select [Port Status], and [Change Settings].6) Select [Enabled], then select [Save].7) Select [Close] repeatedly until the [Network Settings] screen is displayed.