2-9MAINTENANCE SPECIFICATIONS SPEC15151052029224021210.75.15.10.72.92.92.96.51.44.34.33.62.92222177.22.2134.375158.71040197.2M 8 × 1.25M 8 × 1.25M24 × 1.0M 8 × 1.25M12 × 1.25M28 × 1.0M51 × 1.5M22 × 1.25M42 × 1.5M12 × 1.25M 5 × 0.8M 6 × 1.0M 6 × 1.0M 4 × 0.7M 6 × 1.0M 6 × 1.0M 5 × 0.8M 6 × 1.0M 4 × 0.7M 6 × 1.0M 6 × 1.0M 6 × 1.0M 6 × 1.0M10 × 1.25M10 × 1.25M 8 × 1.25M 6 × 1.0M10 × 1.0M10 × 1.0M 8 × 1.25M16 × 1.5M 8 × 1.25M 6 × 1.0M 6 × 1.0M10 × 1.25M 8 × 1.25M 6 × 1.0Handle crown and outer tubeUnder bracket and outer tubeHandle crown and steering shaftHandlebar holder (upper)Handlebar holder (lower)Steering ring nutFront fork and damper assemblyFront fork and adjusterDamper assembly and base valveAdjuster and damper assemblyBleed screw (front fork) and base valveFront fork and protectorProtector and brake hose holderThrottle cable capGrip cap upper and lowerClutch lever (nut)Clutch lever holderFront brake master cylinder and bracketFront brake master cylinder capBrake lever mounting (bolt)Brake lever mounting (nut)Brake lever position locknutCable guide (front brake hose) and under bracketFront brake hose union bolt (master cylinder)Front brake hose union bolt (caliper)Front brake caliper and front forkFront brake caliper and brake hose holderBrake caliper (front and rear) and pad pin plugBrake caliper (front and rear) and pad pinBrake caliper (front and rear) and bleed screwFront wheel axle and nutFront wheel axle holderFront brake disc and wheel hubRear brake disc and wheel hubFootrest bracket and frameBrake pedal mountingRear brake master cylinder and framePart to be tightened Thread size Q’tyTightening torqueNm m•kg ft•lb4414212222262221222111111212221466412212114528403055292917714449266543030231031861052112145526102.12.114.52.84.03.05.52.92.90.10.70.70.10.40.40.40.90.20.60.60.50.43.03.02.31.00.31.80.610.52.11.21.45.52.61.0NOTE:1. First, tighten the ring nut approximately 38 Nm (3.8 m•kg, 27 ft•lb) by using the ring nut wrench,then loosen the ring nut one turn.2. Retighten the ring nut 7 Nm (0.7 m•kg, 5.1 ft•lb).Refer to NOTE.
