Using Feature Codes 1093Com BusinessTelephoneMost of the features that are listed in Table 9 are available on your 3ComBusiness Telephone on single-purpose buttons like Hold, Conference,Transfer, and Message, or on Access buttons that you or youradministrator can program.Nevertheless, you can use feature codes if you like. On Models 1102,2102, and 2102-IR, the top Access button directly below the Programbutton is programmed at the factory as the Feature button for the 3ComBusiness Telephone. On Model 3102, the top Access button in the leftcolumn of 9 buttons is programmed at the factory as the Feature button.(Your administrator can program another button as the Feature button.)Using FeatureCodesFollow these steps to use NBX feature codes:1 Pick up the handset.2 Press the Feature button.3 Dial the feature code and any additional values as specified in Table 9.4 Hang up when your call is complete or you have activated the featuresthat you want.Table 9 NBX Feature CodesFeature Feature Code SeeAccount Codes F + 888 + account code + # + telephonenumber“Account (Billing) Codes” in Chapter 7ACD, Hunt, and CallingGroupsF + feature code for the group + grouppassword + #“Automatic Call Distribution Groups,Hunt Groups, and Calling Groups” inChapter 7Call Forward All F + 465 “Forwarding Incoming Calls” inChapter 5Call Forward Busy F + 467 “Forwarding Incoming Calls” inChapter 5Call Forward No Answer F + 466 “Forwarding Incoming Calls” inChapter 5Call Park — Park a Call F + 444 + one of the Call Park extensionsfor your NBX system“Call Park”in Chapter 7Call Pickup — Directed F + 455 + the extension of the ringingtelephone“Call Pickup” in Chapter 7Call Pickup — Group F + 456 + call pickup group number “Call Pickup” in Chapter 7