Call Pickup 83CLIR for Next External Call OnlyTo enable CLIR for only the next call from your telephone:1 Pick up the handset.2 Press Feature + 890. The telephone display panel shows CLIR-NEXT on.3 Dial the number that you want to call.4 When you disconnect the call, the CLIR feature is no longer in effect.CLIR-NEXT on disappears from the display panel.If you hang up the handset without making a call, the CLIR-NEXT featureremains active and will apply to the next external call that you make. Ifyou are unsure about whether CLIR-NEXT is active, pick up the handset,press Feature + 890, and read the status message in the display panel ofyour telephone.Call Pickup Use the Call Pickup feature to answer a call that is ringing on anothertelephone. This feature is best arranged in advance when you andanother user know that it would be convenient or necessary to answercalls ringing on that user’s telephone.You can answer a call that is ringing on another telephone only if you andthat user both are members of the same Call Pickup group or if that useris a member of a Call Pickup group that allows “nonmember pickup.”Your administrator configures call pickup groups and can tell you whichgroup you belong to.To view the list of Call Pickup groups of which you are a member:1 Log in to NBX NetSet > User Information > Call Pickup.2 Select the group number that you want to view from the Group List, andclick Details to list the members of that group.Directed Call Pickupon a SpecificTelephoneYou can answer a call that is ringing on a specific user’s telephone.Using the feature code:1 Pick up the handset.2 Press Feature + 455 and the user’s extension. The call is directed to yourtelephone.