88 CHAPTER 7: GETTING MORE FROM Y OUR T ELEPHONE SYSTEMHunt groups can be static or dynamic:■ If you are in a static hunt group, you are always part of that groupalong with the other group members.■ If you are in a dynamic hunt group, you must log in to the group to bepart of it.To log in to a dynamic hunt group using your 3Com Telephone:1 Pick up the handset.2 Press Feature + the feature code for the hunt group. Your administratorcan tell you which feature code to use.3 Dial the hunt group password and press #. Your administrator can tell youwhich password to use.To log out of a dynamic hunt group using your 3Com Telephone:1 Pick up the handset.2 Press Feature + the feature code for the hunt group.3 Dial the hunt group password.4 Hang up the telephone.Your administrator can configure a hunt group to an Access button. Tolog in to or to log out of the hunt group, press the specified Accessbutton. The indicator next to the button lights to show that you arelogged in.To log in to a dynamic hunt group using the NBX NetSet utility:1 Log in to NBX NetSet > Hunt Groups.2 Select the hunt group to which you want to log in.3 Click Log In, and then click Close.If you log in to a dynamic hunt group and do not answer a call when itrings on your telephone, the system may log you out of the groupdepending on how the administrator has configured the group.To log out of a dynamic hunt group using the NBX NetSet utility:1 Log in to NBX NetSet > Hunt Groups.2 Select the hunt group from which you want to log out.3 Click Log Out, and then click Close.
