76 CHAPTER 6: P ERSONALIZING YOUR T ELEPHONEUsing a Headset You can use a headset that has a microphone with any telephone on anNBX system.■ For how to use a typical headset and amplifier with 3Com Telephonesother than the 3Com Manager’s Telephone or 3102 BusinessTelephone, see “General Headset Instructions” later in this section.■ For how to connect and use a headset with the 3Com Manager’sTelephone and 3102 Business Telephone, read the next section.With the 3ComManager’s Telephoneand 3Com 3102Business TelephoneThe 3Com Manager’s Telephone and 3Com 3102 Business Telephonehave a headset jack located on the underside of the telephone on the leftside.To prepare the headset for all calls on the 3Com Manager’s Telephoneand 3102 Business Telephone:1 Plug the headset connector into the headset jack on the underside of thetelephone. See Figure 12 in Appendix A for the location of the jack.2 Press the Headset button. By default, this is the Access button just belowthe (Program) button at the top right corner of the telephone.3 Verify that the indicator light beside the Headset button turns on.To answer a call when you are using the headset:1 Put the headset on. When a call comes in, press the System Appearancebutton beside the flashing light. You are connected to the call.The handset can be either on hook or off hook.To end a call when you are using the headset, press the Release buttonon the telephone. By default, the Release button is located at thebottom of the right column of Access buttons.To configure a 3102 Business Telephone to ring through the headset andnot on the telephone, set the ringer tone to Silent Ring. See “RingerTones” on page 64.General HeadsetInstructionsFor 3Com Telephones other than the 3Com Manager’s Telephone or3102 Business Telephone, follow these instructions.You may need to modify some of these instructions for some headsets oramplifiers. See the instructions that come with your equipment.
