50 CHAPTER 5: S TANDARD FEATURESDialing a Call This section describes standard dialing features. For information ondialing from an analog telephone, see the NBX Feature Codes Guide inthe NBX NetSet utility.An Internal Call To dial an internal call:1 Pick up the handset. On 3Com Business Telephones, you can press theSpeaker button. You hear the dial tone. If necessary, select an internalline.2 Dial the person’s 3-digit or 4-digit extension. Or use the display panel tofind and dial the name of the person whom you want to call in the userdirectory, call logs, or a speed dial list.3 When you are finished, hang up the handset. If you pressed the Speakerbutton, press it again to end the call.For details about placing calls to remote or branch offices, see “Dialing aCall to a Remote Office” in Chapter 7.An External Call To dial an external call:1 Pick up the handset. On 3Com Business Telephones, you can press theSpeaker button. You hear the dial tone. If necessary, dial 9, 8 orwhatever to access an external line. If one of the Access buttons isconfigured to access an external line directly, you can press that button.2 Dial the number. Or use the display panel on a 3Com Telephone to scrollto a missed, answered, or dialed number, or a personal or system-widespeed dial number. If you have programmed one of the One-Touchbuttons, press that button.3 When you finish speaking, hang up the handset. If you pressed theSpeaker button, press it again to end the call.Redialing a Call On a 3Com Business Telephone:■ Pick up the handset and press Redial to dial the most recent numberthat you called.OR■ Use the Call Logs on the display panel to redial a recently missed,answered, or dialed call.