Caller ID 81To enter an account code for an outgoing external call:1 Dial the phone number.If an account code is required on a 3Com Entry Telephone or analogtelephone, you hear silence as the system waits for the required accountcode.If an account code is required on a 3Com Business, Basic, or Manager’sTelephone, the display panel prompts you for the required account code.2 Press the # key.3 Dial the account code that has been assigned by your administrator, andthen press the # key.The NBX system records the account code and completes the call:■ The account name, if known, displays. If the account code is incorrect,you are prompted to enter it again.■ On a 3Com Entry Telephone or analog telephone, if the account codeis incorrect you may have to dial the phone number, press #, dial thecorrect account code, and press # again.To enter an account code at any time before or during an incoming oroutgoing call:1 Press Feature + 888.2 Dial the account code that has been assigned by your administrator, andthen press the # key.The NBX system records the account code and applies it to:■ The next call, if you activate the Account Codes feature before a callarrives at your telephone■ The current call, if you activate the Account Codes feature during acallCaller ID Your administrator can set up your NBX system to allow for Internal andExternal Caller ID or can configure the system so that you can block youridentity (telephone number) from anyone you call.Internal and ExternalCaller IDBy default, the NBX system shows the extension and name of any internalcaller on the display panel of your 3Com Telephone.