4 Repair4.5.6. Restoring the balancing device3HAC020993-001 Revision: G298© Copyright 2004-2008 ABB. All rights reserved.4.5.6. Restoring the balancing deviceOverviewThis section details how to restore the balancing device and how to remove the press toolfrom the device.Press tool and hydraulic cylinderThe figure below shows the hydraulic cylinder mounted on the press tool.The press tool includes two press devices that are used to different models of the balancingdevice.xx0200000174Required equipmentA Press blockB Hydraulic cylinderC Press deviceD Bolt, press deviceE Moving pin with markingF Bolt (4 pcs)G Pin, attached to the fix plateEquipment, etc. Art. no. NoteHydraulic valve with hose 3HAC022643-001Hydraulic cylinder 3HAC11731-1 To be used with press tool.Hydraulic pump, 80 MPa 3HAC13086-1 To be used with hydraulic cylinder.Continues on next page
