GUID-D930E5A7-C564-4464-B97F-C72B4801C917 v4The pulse timer function block (PULSETIMERQT) can be used, for example, forpulse extensions or for limiting the operation time of the outputs.PULSETIMERQT has a settable output pulse length.When the input goes to 1, the output will be 1 for the time set by the time delayparameter t. Then it returns to 0.When the output changes value, the time stamp of the output signal is updated.The supported “quality” state bits are propagated from the input to the output ateach execution cycle. A change of these bits will not lead to an updated time stampon the output.PULSETIMERQT can propagate the quality, value and the time stamps of thesignals via IEC 61850.9.8.7.1 Function block GUID-C0490ECF-5C4E-4F17-B628-482694C590D2 v1PULSETIMERQTINPUT OUTIEC15000145.vsdIEC15000145 V1 EN-USFigure 155: PULSETIMERQT function block9.8.7.2 Signals GUID-4543C4C9-FAE2-4328-8DE2-4A5756A020E9 v1PID-3810-INPUTSIGNALS v5Table 223:PULSETIMERQT Input signalsName Type Default DescriptionINPUT BOOLEAN 0 Input signalPID-3810-OUTPUTSIGNALS v5Table 224:PULSETIMERQT Output signalsName Type DescriptionOUT BOOLEAN Output signal9.8.7.3 SettingsPID-3810-SETTINGS v5Table 225:PULSETIMERQT Non group settings (basic)Name Values (Range) Unit Step Default Descriptiont 0.000 - 90000.000 s 0.001 0.010 Pulse time lengthSection 9 1MRK 511 424-UEN BLogic320 Bay control REC650 2.2 IECTechnical manual
